Regulation No 93 of the Economic Commission for Europe of the United Nations ... (42010X0717(03))
Regulation No 93 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of: I. Front underrun protective devices (FUPDs) — II. Vehicles with regard to the installation of an FUPD of an approved type — III. Vehicles with regard to their front underrun protection (FUP)
- Regulation No 93 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of:
- Date of entry into force: 27 February 1994
- Part I — Approval of front underrun protective devices (FUPDs)
- Part II — Approval of a vehicle with regard to the installation of an FUPD of an approved type
- Part III — Approval of a vehicle with regard to its front underrun protection (FUP)
- 1. SCOPE
- 2. PURPOSE
- 3. DEFINITIONS
- 4. APPLICATION FOR APPROVAL
- PART I
- APPROVAL OF FRONT UNDERRUN PROTECTIVE DEVICES (FUPDs)
- 5. APPROVAL OF AN FUPD
- 6. REQUIREMENTS FOR FUPDs
- PART II
- APPROVAL OF A VEHICLE WITH REGARD TO THE INSTALLATION OF AN FUPD OF AN APPROVED TYPE
- 7. APPROVAL OF AN INSTALLATION OF AN APPROVED FUPD
- 8. REQUIREMENTS FOR THE INSTALLATION OF AN APPROVED FUPD
- PART III
- APPROVAL OF A VEHICLE WITH REGARD TO ITS FRONT UNDERRUNPROTECTION (FUP)
- 9. APPROVAL OF A VEHICLE WITH FUP
- 10. REQUIREMENTS FOR A VEHICLE WITH FUP
- Figure 1
- Figure 2
- Figure 3
- ANNEX 1
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- ANNEX 2
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- ANNEX 3
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- ANNEX 4
- ARRANGEMENTS OF APPROVAL MARKS
- 1. APPROVAL NUMBER
- 2. ARRANGEMENTS OF APPROVAL MARKS
- 2.1. Model A
- 2.2. Model B
- ANNEX 5
- TEST CONDITIONS AND PROCEDURES
- 1. TEST CONDITIONS FOR FUPDs
- 2. TEST CONDITIONS FOR VEHICLES
- 3. TEST PROCEDURE
- ANNEX 6
- Conformity of production and other administrative procedures
- 1. CONFORMITY OF PRODUCTION
- 2. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 3. MODIFICATION AND EXTENSION OF APPROVAL
- 4. PRODUCTION DEFINITELY DISCONTINUED
- 5. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS, AND OF ADMINISTRATIVE DEPARTMENTS
Feedback