Regulation No 119 of the Economic Commission for Europe of the United Nations... (42014X0325(03))
Regulation No 119 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of cornering lamps for power-driven vehicles
- Regulation No 119 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of cornering lamps for power-driven vehicles
- SCOPE
- 1. DEFINITIONS
- 2. APPLICATION FOR APPROVAL
- 3. MARKINGS
- 4. APPROVAL
- 5. GENERAL SPECIFICATIONS
- 6. INTENSITY OF LIGHT EMITTED
- 7. TEST PROCEDURE
- 8. COLOUR OF LIGHT EMITTED
- 9. CONFORMITY OF PRODUCTION
- 10. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 11. PRODUCTION DEFINITIVELY DISCONTINUED
- 12. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS, AND OF TYPE APPROVAL AUTHORITIES
- 13. TRANSITIONAL PROVISIONS
- ANNEX 1
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- ANNEX 2
- EXAMPLES OF ARRANGEMENTS OF APPROVAL MARKS
- Figure 1
- Marking for single lamps
- Model A
- Figure 2
- Simplified marking for Grouped, combined or reciprocally incorporated lamps
- Model B
- Model C
- Model D
- Figure 3
- Light source modules
- ANNEX 3
- PHOTOMETRIC MEASUREMENTS
- 1. MEASUREMENT METHODS
- 2. MEASURING POINTS EXPRESSED IN DEGREES OF ANGLE WITH THE AXIS OF REFERENCE
- Figure 1
- 2.1. Field of geometric visibility
- Figure 1
- Figure 2
- 3. PHOTOMETRIC MEASUREMENT OF LAMPS EQUIPPED WITH SEVERAL LIGHT SOURCES
- ANNEX 4
- COLOUR OF WHITE LIGHT
- ANNEX 5
- MINIMUM REQUIREMENTS FOR CONFORMITY OF PRODUCTION CONTROL PROCEDURES
- 1. GENERAL
- 2. MINIMUM REQUIREMENTS FOR VERIFICATION OF CONFORMITY BY THE MANUFACTURER
- 2.1. Nature of tests
- 2.2. Methods used in tests
- 2.3. Nature of sampling
- 2.4. Measured and recorded photometric characteristics
- 2.5. Criteria governing acceptability
- ANNEX 6
- MINIMUM REQUIREMENTS FOR SAMPLING BY AN INSPECTOR
- 1. GENERAL
- 2. FIRST SAMPLING
- 2.1. The conformity is not contested
- 2.1.1.1. Sample A
- 2.1.1.2. Sample B
- 2.2. The conformity is contested
- 2.2.1.1. Sample A
- 2.2.1.2. Sample B
- 2.3. Approval withdrawn
- 2.3.1. Sample A
- 2.3.2. Sample B
- 3. REPEATED SAMPLING
- 3.1. The conformity is not contested
- 3.1.1.1. Sample C
- 3.1.1.2. Sample D
- 3.2. The conformity is contested
- 3.2.1.1. Sample D
- 3.3. Approval withdrawn
- 3.3.1. Sample C
- 3.3.2. Sample D
- Figure 1
Feedback